Hi all,
Looks like a new forum!
I'm having registration issues with a 6x behind a TZ180.
Any general advice?
Cheers,
David
SonicWALL and ITSP
Re: SonicWALL and ITSP
1) Use the proper port forwards on the Sonicwall. udp 15000-15511, udp 2088, udp 5060, tcp 8081.
2) Make sure the remote phone's private network is no the same subnet as the allworx 6x server. (ie if the remote phone is 192.168.2.50 and the allworx is 192.168.2.10, either the allworx network or the remote phone network needs to be renumbered).
3) Make sure none of the Sonicwall's SIP transformations are turned on. The consistent NAT setting on the Sonicwall shouldnt be necessary either.
2) Make sure the remote phone's private network is no the same subnet as the allworx 6x server. (ie if the remote phone is 192.168.2.50 and the allworx is 192.168.2.10, either the allworx network or the remote phone network needs to be renumbered).
3) Make sure none of the Sonicwall's SIP transformations are turned on. The consistent NAT setting on the Sonicwall shouldnt be necessary either.
-
- Posts: 96
- Joined: Tue Mar 29, 2011 10:02 pm
- Location: Southeast USA
- Contact:
Re: SonicWALL and ITSP
I'm having a similar problem with a multi-site setup. The remote site is setup in lan host mode, and a sonicwall is the vpn tunnel to the other sites. We're getting one-way audio when site b calls site a, but not the other way around.
-
- Posts: 96
- Joined: Tue Mar 29, 2011 10:02 pm
- Location: Southeast USA
- Contact:
Re: SonicWALL and ITSP
put the Allworx on a public IP.
The allworx is secure, and ignores all unauthorized traffic. Only issue I've seen with allworx as edge device is port 25 getting slammed by spammers, in which case, change that port. (newer allworx software only uses port 25 for mobile link app and port can be changed for that)
The allworx is secure, and ignores all unauthorized traffic. Only issue I've seen with allworx as edge device is port 25 getting slammed by spammers, in which case, change that port. (newer allworx software only uses port 25 for mobile link app and port can be changed for that)