Page 1 of 1

Multi-Site Help

Posted: Mon Mar 06, 2017 10:54 am
by nickabocker
Hello everyone,

I recently took over an existing Allworx installation and while i have experience with the system i am by no means a professional. The system is multi-sited with with a 48x being the primary and a 6x being a branch site. The system works great expect we recently switched to sip trunks from a PRI which has modified the caller ID settings for the system. My question is how would I go about setting up the Allworx 6x to use one of the DIDs I have for outbound caller ID. I tried setting each handset registered to the 6X Caller ID but that doesn't work and it still uses a different number on outbound.

Thanks in advance,

Nick McNeil

Re: Multi-Site Help

Posted: Sun Mar 26, 2017 2:42 am
by SumGuyInMN
Need to set the SIP Proxy properly to use the handset caller id number/name. Then program the number/name on the handset. There could also be a limitation with the SIP provider.